EA-55XX-4+LP 4 Port Optical Amplifier with Backup Power Supply
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Products
  • Free Delivery
    From $69
  • 99% Customers
    Feedbacks
  • 365 Days
    For Warranty
  • Payment
    Secure System
  • Only Best
    Brands

EA-55XX-4+LP 4 Port Optical Amplifier with Backup Power Supply

Available: In Stock
$1,085.00 $1,085.00
Compare
Image
  • Order within

EDFA (Erbium Doped Fiber Amplifer) is a representative one in the optical amplifier. As the EDFA's wavelength is 1550nm, it is in line with the low-loss band of fiber and its technology has been relatively mature, so widely used. Erbium-doped fiber is the core components of the EDFA, it makes quartz optical fiber as matrix material, and incorporate a certain proportion of rare earth element erbium ions (Er3 +) in the core of a fiber. When certain amount of pump light is injected into the erbium-doped fiber, Er3 + have been excited from the low-energy level to the high energy level, due to Er3 + has a very short lifespan on the high energy level, and soon transit to a higher level by the form of a non-radiative, and form the population inversion distribution between this energy level and low-energy-level. Because the energy between these two energy levels is exactly equal to the photon energy of 1550nm, stimulated emission of 1550nm light can only occur, we can only enlarge 1550nm optical signal.

This series of products adopt 980nm or 1480nm high linearity, optical isolation, the DFB, thermoelectric cooling DFB laser produced by JDSU, Fujitsu, Nortel, Lucent, Fitel and other world-renowned semiconductor companies as the pumping source. In the interior of the machine is equipped with the light power export stable circuit and laser thermoelectric cooling device> temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitor the lasers' working state, the Digital Panel (VFD) displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles., a detailed report of the device parameters please read instructions

EDFA (Erbium Doped Fiber Amplifer) is a representative one in the optical amplifier. As the EDFA's wavelength is 1550nm, it is in line with the low-loss band of fiber and its technology has been relatively mature, so widely used. Erbium-doped fiber is the core components of the EDFA, it makes quartz optical fiber as matrix material, and incorporate a certain proportion of rare earth element erbium ions (Er3 +) in the core of a fiber. When certain amount of pump light is injected into the erbium-doped fiber, Er3 + have been excited from the low-energy level to the high energy level, due to Er3 + has a very short lifespan on the high energy level, and soon transit to a higher level by the form of a non-radiative, and form the population inversion distribution between this energy level and low-energy-level. Because the energy between these two energy levels is exactly equal to the photon energy of 1550nm, stimulated emission of 1550nm light can only occur, we can only enlarge 1550nm optical signal.

This series of products adopt 980nm or 1480nm high linearity, optical isolation, the DFB, thermoelectric cooling DFB laser produced by JDSU, Fujitsu, Nortel, Lucent, Fitel and other world-renowned semiconductor companies as the pumping source. In the interior of the machine is equipped with the light power export stable circuit and laser thermoelectric cooling device> temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitor the lasers' working state, the Digital Panel (VFD) displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles., a detailed report of the device parameters please read instructions

Model

EYDFA

EDFA

 

EYA-55XX-XX

EYA-55XX-XX-3

EA-55XX-XX

EA-55XX-XX-3

Optical properties

Performance

Unit

Index

 

Working wavelength

nm

1540~1563

 

Input optical power range

dBm

-3~+10,-10~+10(-10dBm Only applicable to low light input type)

 

Output power

dBm

+27~+40

+13~+26

 

Output port number

pcs

4,8,16,32,64,128

1,2

 

Output phase difference

dB

-0.5~+0.5

±0.2

 

Noise coefficient

dB

6.3(Pin=0dBm)

6.3(Pin=0dBm)

 

Polarization dependent loss

dB

0.3

0.3

 

Polarization dependent gain

dB

0.4

≤±0.75 0.4

 

Polarization mode dispersion

ps

0.3

0.3

 

Pump leakage power

dBm

-30

 

 

Reflection of light

dB

~

≥45

RF
Characteristics

Optical fiber connector

FC/APC,SC/APC Or Customized

 

Network management interface

RJ45(SNMP),RS232 or RS485

 

Power supply

VAC

90-265 Mains (Optional 48VDC)

 

Power waste

W

≤50(Single supply operation)

 

Box size(W*D*H)

CM

19*14.7*3.5

19*14.2*1.75

RETURNS POLICY

1.Before shipping, you can cancel any order, and we will return the payment.

2. If you find that the packaging is damaged when you receive the goods, please contact us immediately and take a photo for your certificate.

3. If you have any quality problems within 15 days after you confirm receipt of the goods, you can contact us online. After confirming the photos or videos, we will negotiate with you and choose to return the goods or give an equivalent gift card. (Note: The packaging of the product must be complete and undamaged, otherwise we can only give the corresponding gift card at a discount.

4. After you use our products for 15 days, if any quality problems occur during the product warranty period, after confirmation by our technical team, we will Refund or Exchange for you free of charge, or give you a corresponding gift card.

5. After the product has a quality problem after the warranty period, we still provide technical support, but the cost of repair or replacement needs to be paid by the buyer.

SHIPPING

We promise to ship within 48 hours after placing an order and payment on the platform, if you choose standard shipping, it will be delivered within 5-15 days. If you choose Expedited, it will be delivered within 3-10 days. If the weight of the goods exceeds 21kg, You can use Free heavy goods shipping, by DHL, Fedex or UPS .Order more than $69, Stanadrd Shipping is free. If you have any requirements on which express to use, you can directly consult online on the website.

Warranty policy:

1. Electronic products enjoy 1 year warranty from the date of purchase and receipt. Non-electronic products enjoy a 3-year warranty from the date of purchase and receipt

2. Repair or replace the equipment according to the specific failure situation. After our engineer confirms the product problem, the corresponding parts will be sent for replacement. If it is confirmed that it cannot be repaired at the buyer, it is supported to return to the factory for repair or replace the corresponding gift card.

3. All replaced parts, accessories or equipment are brand new.

4. Replaced parts and accessories enjoy the remaining time of the original one-year warranty period or the 90-day warranty period from the date of repair or replacement, whichever is longer.